Plasma Cutting Machining Service For Steel Plate
Our Plasma Cutting Equipment Can Provide High Quality Cutting Service And Can Achieve Accurate Cutting.
Reducing Angle Deviation And Preventing Cutting Surface Damage
The Ability To Produce Holes And Grooves In a Ratio Of 1:1, 5-25 Mm
Cutting Quality And Contour Accuracy Of Inner And Outer Contour Processing And True Hole Processing Are Improved Significantly.
No Drilling Or Machining Is Required.
Inversion And Edge Quality Are Implied In Our Processing Process, Only a Very Small Repair Is Needed For The Edges And Corners.
Order Turnover Is The Fastest.
Low Temperature Cutting Reduces Heat Affected Zone And Improves Cutting Quality. It Is Suitable For Complex Design.
Plasma Cutting Technology
Plasma Cutting Is a Process For Cutting Aluminum, Copper, Magnesium And Other Non-Ferrous Metals. Plasma Cutting Is When You Raise The Temperature Of The Gas To a Very High Level To Ionize It. The Final State Of Matter Is Very Similar To The Conductivity Of Metals.
With The Increase Of Temperature, Gaseous Molecules Split, Leading To Atomic Splitting And The Separation Of Electrons And Nuclei. The Movement Of These Electrons Produces Positively Charged Ions, Which Collide With Each Other To Produce Tremendous Energy. It Is This Energy That Gives Plasma An Incredible Unique Cutting Power.
The Plasma Cutting Machine Can Take Advantage Of And Control This Amazing Power And Use It To Create An Incredibly Accurate And Powerful Cutting Tool. First, The Pressurized Gas Is Transported To a Small Channel With a Negative Charge Electrode. By Electrifying The Electrode And Contacting The Nozzle To The Workpiece, a Circuit Is Formed, Which Generates Sparks Between The Metal Plate And The Electrode.
This Spark Heats The Gas Flowing Through The Passage And Produces Plasma. At Very High Speeds, This Cycle Produces a Steady Focused Plasma Flow, Reaching About 16649 Degrees Celsius (30,000 Degrees Fahrenheit). Incredible Speed And Intense Temperature Cut Metal Into Slag.
To Ensure That The Incision Is Not Oxidized, The Plasma Cutting Machine Will Also Be Equipped With An Additional Set Of Channels To Provide Continuous Protection Of Gas Flow. The Pressure Generated By Gas Is Released Around The Cutting Area, Which Effectively Limits The Range Of Plasma Beam.
Our Company’s Plasma Cutting Processing Capacity:
Thickness: Up To 45mm – Depending On End Use (46mm To 100mm, See Infinite Plasma Contour Slope)
Width: Up To 4 Meters
Length: Up To 24 Meters
